Part of the Kilwaughter Group
Render Only
Silicone Thin Coat Render
Silicone Thin Coat render incorporates the benefits of silicone technology to provide a water repellent final surface with a fresh and modern appearance. The silicone allows water vapour to pass freely through the render whilst allowing the finish to remain weather resistant.
Silicone Thin Coat render contains a biocide to help prevent infection from mould, yeast and algae and also has a low susceptibility to soiling and contamination, making it the ideal solution for a low maintenance, long-term finish.
We have a variety of Thin Coat render colours available and we recommend that all colours & textures are verified against a sample, before ordering.
sample requestview thin coat render colours
Additional Product Information
Collapse All
| Technical Data | |
|---|---|
| Suitability | Suitable for new build and refurbishment projects |
| Grain sizes | Typically a 1.5mm grain size, however other sizes are available |
| Water vapour permeability | Category V 2 |
| Water absorption | Category W 3 |
| Colour Range | 20 standard colours are available. Other colours are available on request. |
| Product Downloads | |
|---|---|
| Technical Data Sheet | Download PDF |
Dash Receiver
Dash Receiver is normally applied over K Systems Base Coats as a background surface for dry dash or roughcast finishes. Dash Receiver can be hand or machine applied and is available in 20 standard colours.
Additional Product Information
Collapse All
| Technical Data | |
|---|---|
| Require | 10-15kg / m² approx. |
| Coverage | 1.5kg / mm thick / m² |
| Nominal | Base Coat: 4-6mm, Dash Receiver: 6-10mm |
| Water required | 5-6L / bag |
HP12 Base Coat
HP12 Base Coat can be hand or machine applied. It uses ‘High Polymer’ technology for an enhanced performance on difficult substrates such as dense block, unpainted render and brickwork (primer may be required). It is ideal as a stipple coat or for dense backgrounds and has increased water resistance and adhesion. Incorporation of Alkali Resistant Reinforcing Mesh may be required at stress points such as door and window reveals. HP12 Base Coat can be used in conjunction with all K Systems render finishes.
Additional Product Information
Collapse All
| Technical Data | |
|---|---|
| Require | 8 - 11kg / sq m approx. | nominal 4-6mm thickness. Up to 12mm thickness onto masonry substrates |
| Classifications according to | BE EN 998-1 |
| Compressive strength | CS IV |
| Capillary water absorption category | W2 |
| Thermal conductivity | P=50% - 0.61 |
| Application Instructions | |
|---|---|
| |
HP14 Base Coat
HP14 Base Coat can be hand or machine applied. It uses “High Polymer” technology for an enhanced performance onto a wide variety of insulating substrates such as enhanced polystyrene, phenolic and mineral wool. It is designed as the ideal background for our render finishes such as Silicone Thin Coat and Dash. Alkali Resistant Reinforcing Mesh should be used in conjunction with HP14 Base Coat at stress points such as door and window reveals.
Additional Product Information
Collapse All
| Technical Data | |
|---|---|
| Require | 8 - 11kg / sq m approx. | nominal 4-6mm thickness onto insulation substrates |
| Classifications according to | BE EN 998-1 |
| Compressive strength | CS IV |
| Capillary water absorption category | W2 |
| Thermal conductivity | P=50% - 0.46 |
| Application Instructions | |
|---|---|
| |
| Product Downloads | |
|---|---|
| Technical Data Sheet | Download PDF |