Maison

Title Image

Renders & Base Coats

Dashing Renders

Alumasc Facades by K Rend Dashing Renders are used to receive the DashAgg stone dash finish for an External Wall Insulation (EWI) system (MR S7) or un-insulated render only applications (MR S5). The dashing renders are supplied as dry, pre-mixed polymer and fibre reinforced powder and are approved for use in a number of Alumasc Facades by K Rend BBA certified systems. When fully cured, our Dashing Renders will be non-flammable and will remain unaffected by the temperature extremes that occur in the UK climate.

Polymer Render Base Coats

Alumasc Facades by K Rend  Polymer Renders (MR S4 & MR S5) are single coat renders that are typically finished with either poly-kote masonry paint or Silkolitt+ silicone render. The MR S4 version of the Alumasc Facades by K Rend Polymer Render is used in insulated External Wall Insulation (EWI) applications whereas the MR S5 formulation is used in render only applications.

Our Polymer Renders are breathable, flexible polymer-reinforced renders that are non-flammable and weathertight when cured, but will freely allow the transmission of water vapour.

Alumasc Facades by K Rend Polymer Renders are available in a range of colours.

Reinforcement Renders

Alumasc Facades by K Rend reinforcement renders are used to provide the construction with the requisite flexibility, impact resistance and durability.

Our Base Coat is a polymer-modified mineral reinforcement mortar that is an integral part of lightweight, thin coat render systems. The Alumasc Facades by K Rend Scrim Reinforcement mesh is bedded into Alumasc Base Coat.

Alumasc Facades by K Rend Scrim Adhesive is a polymer-modified reinforcement adhesive that is specifically designed to adhere our Scrim Reinforcement mesh to the insulation board. Alumasc Facades by K Rend  Scrim Adhesive is typically used with our Polymer Renders or Dashing Renders.

Dubbing Renders

Alumasc Facades by K Rend Dubbing Render (MR S5) is used to ensure that the substrate is line and level prior to the installation of an Alumasc Facades by K Rend External Wall Insulation (EWI) system or render. The dubbing render is supplied as a dry, pre-mixed polymer and fibre reinforced powder and is approved for use in a number of our BBA certified systems. When fully cured, Alumasc Facades by K Rend Dubbing Render will form a weather-tight, breathable and flexible reinforced base coat render.

Insulation Adhesive

Alumasc Facades by K Rend Insulation Adhesive is a polymer-enhanced adhesive that is designed to adhere insulation boards to continuous masonry substrates or cement particle carrier boards. Alumasc Facades by K Rend Insulation Adhesive is supplied as a dry, pre-mixed polymer-modified powder and is approved for use in a number of our BBA certified systems. When fully cured, our Insulation Adhesive will be weather-tight, but will freely allow the transmission of water vapour.

Get a Quick Quote for your project!

Our team of EWI experts are looking forward to receiving your request, and partnering with you on your project. Just let us know the details and we’ll get back in touch with you ASAP.